Products › Tracking › Tracking device › Vehicle Tracker 

GV600 GV600

Part Number: QUECLINK


The GV600 series includes three models of ruggedized waterproof GNSS trackers specially designed for trailer, tanker, reefer and flatbed truck tracking. They include up to a 90-day standby time using an internal rechargeable 5200 mAh battery pack, and support dual external power sources for redundancy.


GSM Specifications:

Operating Band:   850/900/1800/1900 MHz

Data Transmission:     GPRS multi-slot class 10

GNSS Specifications

GNSS Type:     u-blox All-in-One GNSS receiver


      Cold Start: -147 dBm

      Hot start: -156 dBm

      Reacquisition: -160 dBm

     Tracking: -162 dBm

Position Accuracy (CEP50): Autonomous: < 2.5m

TTFF (Open Sky):

      Cold start: 27s average

      Warm start: 27s average

      Hot start: 1s average


Digital Inputs1 positive trigger input for ignition detection

Analog Input1 analog input (0V-32V)

1-wire Interface Support 1-wire temperature sensor (maximum 8 channels)

Power Output:  3.3V output for external devices

Digital Inputs/Outputs: 4 negative trigger inputs for normal use, or 4 open drain outputs 150mA max drive current

Serial Ports:

      1 TTL port

      1 RS232 port

Cellular Antenna : Internal only

GNSS Antenna:     Internal only

LED Indicators: CEL, GNSS, PWR

Connector: 18 pin waterproof connector


General Specifications

Dimensions135mm(L) x 62mm(W) x 38mm(H)


Operating Voltage 8V to 32V DC

Internal BatteryLi-ion, 3.7V, 5200 mAh, 18650 battery pack 

Standby Time: 90-day standby time with 15 minutes online and position reported once per day

Waterproof: IP67 Compliant

Operating Temperature: -20℃~+60℃

Air Interface Protocol

Transmit Protocol:  TCP, UDP, SMS

Scheduled ReportReport position and status based on preset time intervals, distance, mileage or a combination of these settings

Geo-fences:   Geo-fence alarm and parking alarm, support up to 20 circular and 20 polygon geo-fence regions

Low Power AlarmAlarm when backup battery is almost exhausted

Power On ReportReport when the device is powered on

Special Alarm:  Special alarm based on digital/analog inputs, preset speed and internal 3-axis accelerometer

Remote ControlOTA control of digital outputs

Ask for information
For more information, please fill out the below form.
Please enter characters displayed on the image