Products › Tracking › Tracking device › Vehicle Tracker
GMT200 
Part Number:
QUECLINK
Product Info
Description:
The GMT200 is a compact water resistant GPS tracker designed for applications requiring low current drain such as motorcycles and boats. The model has three working power modes to achieve excellent power management, including zero current drain from vehicles when ignition is off. Besides, the GMT200 can further reduce current drain via configuring alternative recharge schemes for its internal battery.
Specification:
GSM Specifications
Frequency:
Quad band: 850/900/1800/1900 MHz
Compliant to GSM phase 2/2+
-Class 4 (2W @ 850/900 MHz)
-Class 1 (1W @ 1800/1900 MHz)
- GPRS:
GPRS multi-slot class 10
GPRS mobile station class B
RMS Phase Error: 5 deg
Max RF Output Power:
GSM850/GSM900: 33.0±2 dBm
DCS1800/PCS1900: 30.0±2 dBm
Dynamic Input Range: -15 ~ -108 dBm
Receiver Sensitivity: Class Ⅱ RBER 2% (-107 dBm)
Stability Of Frequency: < 2.5 ppm
Max Frequency Error: ±0.1 ppm
GNSS Specifications
GNSS Type: u-blox All-In-One GPS receiver
Sensitivity:
Autonomous: -147 dBm
Hot start: -156 dBm
Reacquisition: -160 dBm
Tracking: -162 dBm
Position Accuracy:
Autonomous: < 2.5m
SBAS: < 2.0m
TTFF (Open Sky):
Cold start: 27s average
Warm start: 27s average
Hot start: 1s average
Interfaces
Digital Inputs:
1 positive trigger input for ignition detection
1 negative trigger input for normal use
Latched Digital Output: 1 digital output with internal latch circuit, open drain, 150 mA max drive current
GSM/GPS Antenna: Internal only
LED Indicators: CEL, GPS, PWR
Mini USB Interface: Used for external power and configuration
General Specifications
Dimensions: 70mm(L) x 46mm(W) x 17.5mm(H)
Weight: 62g
Backup Battery: Li-Polymer, 650 mAh
Standby Time:
Without reporting: 140 hours
5 minutes’ reporting: 70 hours
10 minutes’ reporting: 90 hours
Water Resistance: IPX6 compliant
Operating Voltage: 9V to 32V DC
Operating Temperature:
-20℃ ~ +80℃
-40℃ ~ +80℃ for storage
Power Management: Three working modes including zero current drain from vehicle when ignition is off
Air Interface Protocol
Transmit Protocol: TCP, UDP, SMS
Scheduled Report: Report position and status based on preset time intervals, distance, mileage or a combination of these settings
Geo-fences: Geo-fence alarm and parking alarm, support up to 5 internal geo-fence regions
Power On/Off Report: Report when the device is powered on and off
Tow Alarm: Alarm for tow event in ignition-off state
Special Alarm: Special alarm based on digital inputs
Low Power Alarm: Alarm when backup battery is low
Remote Control: OTA control of digital outputs
Ask for information
For more information, please fill out the below form.
Quick Access