Description:
The GB100 series includes three models of insurance telematics devices allowing varying levels of sample frequency and support for Bluetooth. The devices are simply mounted to the vehicle’s battery, allowing either a very low cost installation or for the insurance customer to self-fit.
Quad band: 850/900/1800/1900 MHz
Compliant to GSM phase 2/2+
-Class 4 (2W @ 850/900 MHz)
-Class 1 (1W @ 1800/1900 MHz)
GPRS mobile station class B
GSM850/GSM900: 33.0±2 dBm
DCS1800/PCS1900: 30.0±2 dBm
Dynamic Input Range: -15 ~ -108 dBm
Receiver Sensitivity: Class Ⅱ RBER 2% (-107 dBm)
Stability of Frequency: < 2.5 ppm
Max Frequency Error: ±0.1 ppm
GNSS Type: u-blox All-in-One GNSS receiver
Position Accuracy (CEP): Autonomous: < 2.5m
GSM Antenna: Internal only
GNSS Antenna: Internal only
Bluetooth Antenna (GB100P): Internal only
LED Indicators: GSM, GPS, PWR
Dimensions: 91.5mm(L) x 51.5mm(W) x 11mm(H)
Backup Battery: High temperature NiMH, 200 mAh
Water Resistance: IP65 compliant
Operating Voltage: 8V to 32V DC
GB100: 3-axis Accelerometer: 100 Hz
GB100P: 3-axis Accelerometer: 1600 Hz
Internal Gyroscope (GB100P): MEMS gyro-sensor
Bluetooth (GB100P): Support BLE 4.2 protocol
Transmit Protocol: TCP, UDP, SMS
Power Supply Monitoring: Report/alarm of external power and backup battery status
Scheduled Report Report position and status based on preset time intervals, distance, mileage or a combination of these settings
Geo-fences: Geo-fence alarm and parking alarm based on up to 20 preset geo-fence regions
Speed Alarm: Unusual speed alarm via flexible monitoring of speed
Driving Behavior Monitoring: Aggressive driving behavior detection, including harsh braking, acceleration, etc.
Compressed GPS Data Packet: 1 second GPS data packet while vehicle is in motion
Crash Data Packet: Crash data collection from accelerometer up to 15 seconds before and after an incident