Products › Tracking › Tracking device › Vehicle Tracker 

GV56 GV56

Part Number: QUECLINK


The GV56 is a cost-effective GNSS tracker designed for a wide range of basic tracking applications. The model has a 1-wire interface used to support either 1-wire temperature sensor or iButton driver ID. Its built-in Bluetooth can be used for both data and voice transmission.


GSM Specifications



      Quad band GSM/GPRS 850/900/1800/1900 MHz

      Compliant to GSM phase 2/2+

      -Class 4 (2W @ 900/850 MHz)

      -Class 1 (1W @ 1800/1900 MHz)


      GPRS multi-slot class 10

      GPRS mobile station class B

RMS Phase Error: 5 deg

Max RF Output Power:

      GSM850/900: 33.0±2 dBm

      DCS1800/PCS1900: 30.0±2 dBm

Dynamic Input Range: -15~ -108 dBm

Receiver Sensitivity: Class ⅡRBER 2% (-107 dBm)

Stability of Frequency: < 2.5 ppm


GNSS Specifications

GNSS Type: MTK GNSS receiver


      Autonomous: -148 dBm

      Hot start: -163 dBm

      Tracking: -165 dBm

Position Accuracy (CEP): Autonomous: < 2.5m

TTFF (Open Sky):

      Cold start: 32s average

      Warm start: 30s average

      Hot start: 1s average



Digital Input: 1 positive trigger input for ignition detection

Digital Output: 1 digital output, open drain, 150 mA max drive current

Analog Input: 1 analog input (0V-30V)

1-wire Interface: Support 1-wire temperature sensor and iButton driver ID

GSM Antenna: Internal only

GNSS Antenna: Internal only

Bluetooth Antenna: Internal only

LED Indicators: CELL, GNSS 


General Specifications

Dimensions: 79.5mm(L) x 44.3mm(W) x 11.9mm(H)

Weight: 55g 

Backup Battery: Li-Polymer, 170 mAh

Standby Time:

      Without reporting: 45 hours

      5 minutes’ reporting: 30 hours

      10 minutes’ reporting: 35 hours

Operating Voltage: 8V to 32V DC

Operating Temperature:

      -30℃~ +80℃

      -40℃ ~ +80℃ for storage

Bluetooth: Support Bluetooth 3.0 (two-way voice communication) & BLE 4.0


Air Interface Protocol

Transmit Protocol: TCP, UDP, SMS

Scheduled Report: Report position and status based on preset time intervals, distance, mileage or a combination of these settings

Geo-fences: Geo-fence alarm, support up to 20 circular and 20 polygon geo-fence regions

Power On Report: Report when the device is powered on

Special Alarm: Special alarm based on digital inputs

Remote Control: OTA control of digital outputs

Motion Detection: Motion detection based on internal 3-axis accelerometer

Driving Behavior Monitoring: Aggressive driving behavior detection, including harsh braking, acceleration, etc.

Jamming Detection: Alarm based on jamming detection

Crash Detection: Accident data collection for reconstruction and analysis

Tow Alarm: Alarm for tow event in ignition-off state

Ask for information
For more information, please fill out the below form.
     _        __        
    | |      /  |       
  __| |__  __`| |   ___ 
 / _` |\ \/ / | |  / _ \
| (_| | >  < _| |_|  __/
 \__,_|/_/\_\\___/ \___|
Please enter characters displayed on the image