Products › Tracking › Tracking device › Vehicle Tracker 


Part Number: QUECLINK


The GV300CAN is a compact GNSS tracking device designed for a wide variety of vehicle tracking applications. The model features CAN and J1708 ports which decode information from vehicle digital buses (CAN bus and J1708). It also has multiple interfaces that can support a wide range of external accessories.
GSM Specifications
      Quad band: 850/900/1800/1900 MHz
      Compliant to GSM phase 2/2+
        -Class 4 (2W @ 850/900 MHz)
        -Class 1 (1W @ 1800/1900 MHz)
    GPRS multi-slot class 10
      GPRS mobile station class B
RMS Phase Error: 5 deg
Max RF Output Power:
    GSM850/GSM900: 33.0±2 dBm
      DCS1800/PCS1900: 30.0±2 dBm
Dynamic Input Range: -15 dBm ~ -108 dBm
Receiver Sensitivity: Class ⅡRBER 2% (-107 dBm)
Stability of Frequency: < 2.5 ppm
Max Frequency Error: ±0.1 ppm
GNSS Specifications
GNSS Type: u-blox All-in-One GNSS receiver
    Autonomous: -147 dBm
      Hot start: -156 dBm
      Reacquisition: -160 dBm
        Tracking: -162 dBm
Position Accuracy (CEP): Autonomous: < 2.5m
TTFF (Open Sky)
    Cold start: 27s average
    Warm start: 27s average
      Hot start: 1s average
Digital Inputs:
    1 positive trigger input for ignition detection
    2 negative trigger inputs for normal use
Digital Output: 1 digital output, open drain, 150 mA max drive current
Latched Digital Output: 1 digital output with internal latch circuit, open drain, 150 mA max drive current
Analog Input: 1 analogue input with selectable input voltage range (0V-12V or 0V-30V)
1-wire Interface: Support 1-wire temperature sensor and iButton driver ID
Vehicle Bus:
    Support CAN Bus
    Support J1708 Bus
GSM Antenna: Internal only
GNSS Antenna: Internal antenna and optional external antenna
Bluetooth Antenna: Internal only
LED Indicators: CEL, GNSS, CAN
Mini USB Interface: Used for upgrading and debugging
Serial Port: 1 RS232 serial port on 16 pin molex type connector for external devices 
General Specifications
Dimensions: 80mm(L) x 48mm(W) x 25mm(H)
Weight: 65g
Backup Battery: Li-Polymer, 250 mAh
Bluetooth: Support BLE 4.2 protocol
Operating Voltage: 8V to 32V DC
Operating Temperature:
    -30℃ ~ +80℃
    -40℃ ~ +80℃ for storage
Air Interface Protocol
Transmit Protocol: TCP, UDP, SMS
Scheduled Report: Report position and status based on preset time intervals, distance, mileage or a combination of these settings
Geo-fences: Geo-fence alarm and parking alarm, support up to 20 internal geo-fence regions
Power On Report: Report when the device is powered on
Power Off Report: Report when the device is powered off
Motion Detection: Alarm based on internal 3-axis accelerometer
Special Alarm: Special alarm based on digital inputs
Power Supply Monitoring: Report of external power status
Tow Alarm: Alarm for tow event in ignition-off state
Speed Alarm: Flexible speed monitoring for unusual speed alarm
Remote Control: OTA control of digital outputs
Fuel Level Sensing: Configurable support for fuel level sensing using the vehicle's built-in fuel sensor or gauge
Temperature Detection: Alarm for temperature detection
Driving Behavior Monitoring: Aggressive driving behavior detection, including harsh braking, acceleration, etc.
Crash Detection: Accident data collection for reconstruction and analysisGSM Specifications
Ask for information
For more information, please fill out the below form.
 _____  _    _____  _____ 
/ __  \| |  |  ___||  ___|
`' / /'| |_ |___ \ |___ \ 
  / /  | __|    \ \    \ \
./ /___| |_ /\__/ //\__/ /
\_____/ \__|\____/ \____/ 
Please enter characters displayed on the image